Fluids and capacities for the Kubota M126XDTPC
| Where | Capacity | What the manual calls for |
|---|---|---|
| Fuel | 190 L (50.2 US gal) | No. 2-D diesel fuelNo. 1-D diesel fuel below -10 °C (14 °F) |
| Coolant | 14.6 L (15.4 US qt); recovery tank 1.5 L (1.6 US qt) | Fresh clean soft water with anti-freezeCab: about 1 L (0.26 US gal) more, for the heater. |
| Engine oil (with filter) | 14.6 L (15.4 US qt) | API CF or CI-4 (external EGR type engine)CJ-4 oil cannot be used on this machine.Above 25 °C (77 °F): SAE 30, SAE 10W-30 or 15W-400 °C to 25 °C (32 °F to 77 °F): SAE 20, SAE 10W-30 or 15W-40Below 0 °C (32 °F): SAE 10W, SAE 10W-30 or 15W-40 |
| Transmission (transmission case) | 60 L (63.4 US qt) | Kubota UDT or Super UDT fluidRegular UDT also permittedWe carry: Kubota Premium UDT |
| Front axle | Front differential case 13 L (13.7 US qt); front axle gear case 4.5 L (4.8 US qt) | Kubota UDT or Super UDT fluid or SAE 80 - SAE 90 gear oilWe carry: Kubota Premium UDT |
| Idler cases | Front idler case 0.5 L (0.5 US qt), rear idler case 0.5 L (0.5 US qt), for each side | Kubota UDT or Super UDT fluid or SAE 80 - SAE 90 gear oilWe carry: Kubota Premium UDT |
| Track roller case | 0.2 L (0.2 US qt) | Kubota UDT or Super UDT fluid or SAE 80 - SAE 90 gear oilWe carry: Kubota Premium UDT |
| Grease | — | Multipurpose grease NLGI-2 or NLGI-1 (GC-LB)We carry: Kubota Premium Synthetic Grease |
| Grease points: top link (2), lift rod (3), front axle gear case support (2), front axle support (2), steering joint shaft (1), assist cylinder (if equipped) (2), sprocket (24), swing pivot (6), guide roller (6), battery terminal (2) | ||
Capacities are approximate. Always fill to the level mark.
From the Kubota operator's manual for the M126X power crawler, 3T495-9971-3, pages 89 and 117, and its power crawler section, pages 15 and 21.