Fluids and capacities for the Kubota M108X
| Where | Capacity | What the manual calls for |
|---|---|---|
| Fuel | 190 L (50.2 US gal) | No. 2-D diesel fuelNo. 1-D diesel fuel below -10 °C (14 °F) |
| Coolant | 9 L (9.5 US qt); recovery tank 1.1 L (1.2 US qt) | Fresh clean water with anti-freezeCab: about 1 L (0.26 US gal) more, for the heater. |
| Engine oil (with filter) | 10.5 L (11.1 US qt) | API CF or better (EGR type engine); Class CF-4, CG-4 and CH-4 engine oils cannot be used on EGR (Exhaust Gas Re-circulation) type engines.CJ-4 oil cannot be used on this machine.Above 25 °C (77 °F): SAE 30, SAE 10W-30 or 10W-400 °C to 25 °C (32 °F to 77 °F): SAE 20, SAE 10W-30 or 10W-40Below 0 °C (32 °F): SAE 10W, SAE 10W-30 or 10W-40 |
| Transmission (transmission case, oil also used as hydraulic fluid) | 60 L (63.4 US qt) | Kubota UDT or Super UDT fluidWe carry: Kubota Premium UDT |
| Front axle | Differential case 7 L (7.4 US qt); front axle gear case 3.5 L (3.7 US qt) | Kubota UDT or Super UDT fluid or SAE 80 - SAE 90 gear oilWe carry: Kubota Premium UDT |
| Grease | — | Multipurpose grease NLGI-2 or NLGI-1 (GC-LB)We carry: Kubota Premium Synthetic Grease |
| Grease points: top link (2), lift rod (3), front axle gear case support (2), front axle support (2), steering joint shaft (1), assist cylinder (if equipped) (2), battery terminal (2) | ||
Capacities are approximate. Always fill to the level mark.
From the Kubota operator's manual for the M108X, 3P701-9971-1, pages 3, 85, 86, 119 and 120.