Fluids and capacities for the Kubota M100GX
| Where | Capacity | What the manual calls for |
|---|---|---|
| Fuel | 190 L (50.2 US gal) | No. 2-D S15 diesel fuelNo. 1-D S15 diesel fuel below -10 °C (14 °F)Ultra low sulfur diesel fuel only [below 0.0015% (15 ppm)] |
| Coolant | 10.1 L (10.7 US qt) in the older manual, 9.6 L (10.1 US qt) in the newer manual; recovery tank 1.1 L (1.2 US qt) | Fresh clean soft water with anti-freezeCab: about 1 L (0.26 US gal) more, for the heater. |
| Engine oil (with filter) | 10.5 L (11.1 US qt) | API CJ-4 (DPF type engine)Above 25 °C (77 °F): SAE 30, SAE 10W-30 or 15W-40-10 °C to 25 °C (14 °F to 77 °F): SAE 20, SAE 10W-30 or 15W-40 (older manual)-10 °C to 25 °C (14 °F to 77 °F): SAE 10W-30 or 15W-40 (newer manual)Below -10 °C (14 °F): SAE 10W-30We carry: Kubota Premium Heavy Duty Synthetic Blend Engine Oil SAE 10W-30 |
| Transmission (transmission case) | 65 L (68.7 US qt) | Kubota Super UDT2 fluidRegular UDT also permittedWe carry: Kubota Premium UDT |
| Front axle | Front differential case 7 L (7.4 US qt); front axle gear case 3.5 L (3.7 US qt) | Kubota Super UDT2 fluid or SAE 80 - SAE 90 gear oilWe carry: Kubota Premium UDT |
| Grease | — | Multipurpose grease NLGI-2 or NLGI-1 (GC-LB)We carry: Kubota Premium Synthetic Grease |
| Grease points: top link (2), lift rod (2), front axle gear case support (2), front axle support (2), hydraulic lift cylinder pin (4), hydraulic arm axle (1), battery terminal (2) | ||
Capacities are approximate. Always fill to the level mark.
From the Kubota operator's manuals for the M100GX, 3Y205-9971-4 (older manual), pages 105, 106 and 136, and 3Y999-0080-1 (newer manual), pages 105, 106 and 137.