A Kubota DMC8500 mower conditioner cuts hay with a disc cutterbar and conditions it in the same pass. We sell three, from 11 ft 6 in (3.5 m) to 15 ft 5 in (4.7 m) wide, each with Kubota's SemiSwing tine conditioner.
Cutting
Each disc carries three blades, and an even number of counter-rotating discs overlap generously for better crop flow, on a fully welded cutterbar. A simple crank sets the whole cutterbar up or down to the stubble height you want; 40 mm skid shoes are standard.
Conditioning
The three we sell have Kubota's SemiSwing tine conditioner, with an adjustable conditioning hood that Kubota says is highly adaptable to varying crop types. An adjustable rear deflector sets the windrow from narrow to widespread. For when conditioning pays off, see our post on conditioning hay versus straight cutting.
Matching to Your Tractor
Kubota lists the minimum PTO power each needs: 90 hp (67.1 kW) for the DMC8536T, 100 hp (74.6 kW) for the DMC8540T and 120 hp (89.5 kW) for the DMC8547T, with a 540 or 1000 rpm PTO. All three are centre-pivot trailed models, so you can mow in a continuous pattern without opening new headlands.
Common Questions
What's the difference between a tine and a roller conditioner?
Kubota says its tine conditioner is highly adaptable to varying crop types, and its rubber rollers give gentle handling to fragile crops such as alfalfa or clover. The three we sell have tines.
What tractor do I need for a DMC8540T?
At least 100 hp (74.6 kW) of PTO power, with a 540 or 1000 rpm PTO.
Talk to GPK
See the DMC8536T, DMC8540T and DMC8547T.
Sources: Kubota Canada's DMC8500 Series page (kubota.ca) and its DMC Series brochure, read November 2, 2026.
